It is difficult to achieve the most universal component of the jig when working with the entire range of furniture boards. The most popular furniture board with a thickness of 18 mm was chosen as the basis for the developed model.
After the conductor was taught to work with a 18mm plate. there was a need to adapt it to other standards: in our case, we will consider a refinement that allows us to perform all operations with a plate with a caliber of 16mm.
The only correct solution is to set the coordinate for the minifix dowel in the face from the edge of the part 8.5mm. (clearance 0.5mm. for an edge of 0.4-0.5mm) and, accordingly, 10mm. (clearance for the edge 2.0mm.) is a compensation of one millimeter according to the diagram.
This compensation was performed by removable plates on a horizontal guide. The plates are securely fixed on a convex rib on neodymium magnets.
Comments powered by CComment